SAA2 Warning Lamp + Video

Scalable safety accessory to mark testing area

The new SAA2 is a small, lightweight, and scalable safety accessory that helps you to mark your testing area and warn people that the prohibition zone around the test setup must not be entered. The system is cascadable up to 6 lamps.

Depending on the status of the test device – in operation, ready to measure, etc. – the SAA2 shows either a green or red light. In addition to the red flash light, the SAA2 can also give an audible signal if a measurement is ongoing. It also offers an emergency button to stop the measurement immediately, if needed.

The warning lamp is equipped with magnetic holders and a hook. Thus, you can either attach it to any construction in the substation or place it on a tripod as a standalone version. The system is cascadable, so that you can decide whether you need one, two, four, or up to six signal lamps to mark your testing area.

SAA2 can be used with CPC 100/80, TESTRANO 600, COMPANO 100, CIBANO 500 and VOTANO 100. Via the control unit, the SAA2 can be combined with other OMICRON safety accessories, such as the SAA1 beeper, TRC1 remote control, SAB1 safety box and the remote safety switch.

Test Universe 4.00 available

Note: Most test modules offered in Test Universe 4.00 may be used offline (e.g. create, modify and view test documents incl. Control Center documents; get to know the features of a test module) even if a license is not present for them. A license per module and test set is needed to carry out a live test. For evaluation purposes, please contact your distributor/representative for a time limited license file.

Test Universe software updates are free of charge from version 2.0 or higher. If you still work with a version prior to 2.0 please contact your distributor/representative or the OMICRON office nearest you for pricing information.

Update information

To benefit from the latest update please download Test Universe 4.00 and its updates.
Alternatively you can order this software on DVD.

Note: For users still running Test Universe under Microsoft Windows XP – Test Universe 3.10 is the latest compatible version.

Downloads

TestUniverse_4.00_x64.exe (2 GB)

Windows 7 (64 bit), Windows 8 (64 bit), Windows 8.1 (64 bit), Windows 10 (64 bit)

TestUniverse_4.00_x86.exe (2 GB)

Windows 7 (32 bit), Windows 8 (32 bit), Windows 8.1 (32 bit), Windows 10 (32 bit)

What’s New

The new Test Universe 4.00 offers various new features and improvements.

  • Power and Advanced Power test modules
  • Auto-Save for Control Center tests
  • Restructured Start Page, also presenting ADMO, RelaySimTest and CMControl-P
  • All test modules installed and usable offline even without module license (license per CMC needed for actual test)
  • ADMO (single-place) included
    with unrestricted free test set management
    other ADMO features fully usable without license until end of 2019 (afterwards read-only without license)

Power modules:

These test modules aim at testing all applications which focus at and/or are assessed in the complex power domain P,Q resp. S, phi. The applications to be tested range from load shedding and stability functions like Q-V protection to power swing blocking to generator and motor protection as well as admittance testing (e.g. zero-sequence admittance protection against ground faults).

  • Complex power view P,Q
  • Complex zones/elements, definition similar to the way impedance zones are defined in Distance
  • Shots, defined as P,Q or S, phi
  • Ramps, defined in the P,Q plane (Advanced Power only)
  • Linear smooth or step ramps changing P and Q (line) or S and phi (arc) • Linear frequency change supported for ramps
  • Constant voltage or constant current model
  • R,X impedance view with impedance zones (e.g. distance protection), also transformed into and shown in the P,Q power view (Advanced Power only)
  • Test repetition with statistical analysis (Advanced Power only)
  • Mirrored/scaled currents for a second current triple, to avoid pick-up of differential elements during test shots (Advanced Power only)

StationScout – Testing your SAS through the whole lifecycle

IEC 61850 Substation Automation System testing

Testing automation, control, and SCADA communication in IEC 61850 Substation Automation System (SAS) is as time consuming as testing the protection – or often even more. StationScout simplifies the testing and reduces the required effort significantly.

With its powerful functions, StationScout is a specialist for the whole lifecycle of a SAS – from engineering to continuous maintenance. The clear status overview provides ideal support for commissioning and maintenance engineers during the different tasks in Substation Automation Systems utilizing IEC 61850.

Key features:

Status overview: StationScout provides a clear overview of the substation, visualizing the communication according to IEC 61850 in SCL files, values and states in the substation.

Signal tracing: The communication diagram of StationScout allows for signal tracing, from the overview down to the detailed communication message attributes.

Automated testing:
StationScout is able to re-use predefined test plans for an automated testing procedure.

Cyber security: The dedicated hardware of StationScout ensures cyber secure operation within the substation communication network.

Simulation: The powerful simulation features of StationScout simplify testing and commissioning. Missing IEDs and IOs can also be simulated.

Defining own names: IEC 61850 abbreviations are quite cryptic. Defining of own names in StationScout allows for comfortable asset handling.

Läs mer på: https://www.omicronenergy.com/en/products/stationscout

OMICRON Power Academy IEC61850 Basics, Application and Testing Kursen, Nyköping 21-23 Augusti 2018 är nu genomförd

CE POWER AB har ännu en gång arrangerat en kurs med OMICRON Power Academy

Lärare var Jacob Vogelberg
12 deltagare från Svenska Kraftnät
Innehåll den här gången var ”IEC61850 Basics, Application and Testing ”
Kursen och boendet var på Clarion-Collection Hotel Kompaniet i Nyköping.

På onsdagskvällen kunde alla njuta av de fina bilarna som Nyköpings Automobil klubb ställde ut i hamnen.

OMICRON Power Academy Training IEC 61850 Basics, Application and testing. Nyköping 29 Maj-31 Maj 2018 är nu genomförd

Ännu en kurs genomförd på Sunlight Hotell i Nyköping med lärare från OMICRON Power Academy,
med CE Power som arrangör. Datum 29/5 Tisdag – 31/5 Torsdag Vecka 22 2018

Temat denna gång var : IEC 61850 Basics, Application and Testing.

På onsdag kväll blev det en runda i hamnen med fokus på bilarna som Automobilklubben i Nyköping arrangerar varje onsdag på sommaren.

Tema denna gång Mittmotorer och svansmotorer.

Senare samma kväll blev det trevlig samvaro och god mat på Lotsens restaurang i gamla hamnkontorets lokaler.

Christer Ekström avslutar och tackar både läraren Ali samt alla 12 kunderna !